Home /Products/Radioactive Lightning Rod/Radar Lightning Rod Weather Radar Lightning Rod Glass Steel Lightning Protection Device

Radar Lightning Rod Weather Radar Lightning Rod Glass Steel Lightning Protection Device

1 Piece
MOQ
$779.00(1 - 2 Pieces) $776.00(>=3 Pieces)
Price
Radar Lightning Rod Weather Radar Lightning Rod Glass Steel Lightning Protection Device
Features Gallery Product Description Request A Quote
Features
Specifications
Material: Stainless Steel
Type: Glass Steel
Application: Radar Lightning Rod
Basic Infomation
Payment & Shipping Terms
Packaging Details: Packing:Foam and carton packing Foam and carton packing Iron parts: wrap with foam cotton or plastic bag and put on special shaft support plate Aluminum parts: tear the large roll of foam cotton to the right size and wrap the product tightly to prevent s
Supply Ability: 10000 Piece/Pieces per Year
Product Description
Product Description

Product parameters

There are two types of glass fiber reinforced plastic lightning rods: 1. Airport glass fiber reinforced plastic lightning rods 2. Weather station glass fiber reinforced plastic lightning rods The difference between the two is that the airport glass fiber reinforced plastic lightning rod is easy to break (to prevent aircraft and other equipment from hitting, weighing the advantages and disadvantages, the airport is easy to break), the weather station radar station lightning rod is not easy to break.     The glass fiber reinforced plastic lightning rod is passive and non-radiative. Its energy comes from the potential difference between the ground layer and the cloud layer before the lightning occurs. Its components include: the central axis, the upper electrode, the discharge trigger device, and the bottom electrode.
wind resistance
40m / s-60m / s
temperature resistance
-40 ℃ --80 ℃
Height
11 m / 13 m / 15 m/ 17 m/ 19 m/ 21m

Main feature

1. It does not affect the electromagnetic wave transmission of the new generation Doppler weather radar, and it is not affected at all. Other lightning rods do not have this characteristic.    2. Light weight, corrosion resistance, high strength, strong wind resistance, wind resistance: 40m / s-60m / s.    3. FRP insulation, temperature resistance -40 ℃ --80 ℃.    4. Precise discharge in advance, fully active lightning.    5. Under the same conditions, it covers a wider area than ordinary lightning rods.    6. Safe, reliable and maintainable. FRP lightning rods have no radioactive elements, are resistant to corrosion and have strong wind resistance. Passive, no energy-consuming components, it is not subject to surge impact and has a long life. FRP lightning rod is a new type of FRP lightning rod specially developed and produced by various microwave communication stations, radar stations, weather stations and other places. The material is all glass fiber reinforced plastic, the needle height is 11 meters / 13 meters / 15 meters / 17 meters / 19 meters / 21, etc. The height can be customized according to customer needs, and the protection range is calculated according to the rolling ball radius method GB50057.

Installation of lightning rods

1. The assembly and installation of the lightning rod is carried out at the construction site. When assembling, before connecting the air-termination device to glass steel pipe, connect one end of a copper wire with a cross section of 70mm in length to the nose and use it with the thread at the lower end of the air-termination device The bolts of M1012 are connected and welded on the base or base plate (user-supplied). Note: The mounting bolts of the base or base plate must be welded to the building reinforcement; 2. First apply the adhesive on the threads of the inner wall of the M36 under the air-termination device and the M36 of the glass steel tube (a) (the adhesive is made of a mixture of low-molecular-weight 650 polyamide resin and epoxy resin), then screw it in To be cured; and so on until the entire lightning rod is assembled, the curing name (the straightness of the adjustable lightning rod can be adjusted during this period is not greater than 10mm), (the curing time is according to the time specified on the adhesive), and printed at each joint Hole, tap M8 (depth is to penetrate through the thickness of the two tubes), set the screw size to M8x25, screw in the name, and then apply adhesive to the screw head; 3.Place the assembled glass steel needle in the pillar of the flange base with a tower crane, fill it with B-666 silicone rubber, and tighten the 8 positioning screws on it to adjust the verticality (visual inspection) to make it Meet the requirements, then fix it; 4. The height of the lightning rod is customized according to user requirements.
Recommended Products
Get in touch with us
Contact Person : Steven
Characters Remaining(20/3000)
Get In Touch
Room 1412, No. 117, Lane 556, LaiYang Industrial Park, Jinan, Shandong, China
About
Company Profile Factory Tour Quality Control Contact Us
Products
Lightning Arrester RodCopper Lightning RodLightning Spike Rod All Categories
Mail Us
Let us know your requirement. We will connect best products with you.
Sitemap │ Mobile Site │ Privacy Policy
China Good Quality Lightning Arrester Rod Supplier. © 2022 - 2024 lightningarresterrod.com. All Rights Reserved.